FOUND Brake proportioning valve

[Fast340cuda]

Looking for a brake proportioning valve to complete the front disc conversion on my project. I know reproductions are available but would prefer a nice original part if possible. I believe most 71 and up A or B body with disc/drum would work.

Let me know if you have a spare laying around that you wouldn’t mind selling.

Thanks!

 

[Moparsal]

Something like this, make offer

 

[Fast340cuda]

Something like this, make offer

View attachment 1267919 View attachment 1267920 View attachment 1267921 View attachment 1267922

Thanks for the reply! That looks like the one I have for my current 4 wheel drum set up.

My research shows there are 2 main types of blocks used starting in the late 60’s through the 70’s. The rectangular shaped distribution block was for 4 wheel drum (also used on 1967-1970ish a bodies with an additional hold off valve for the rear drums when used with factory front disc) or the “Texas” shaped proportioning valve for 71 and later drum/disc cars. I am looking for the Texas shaped unit.

 

[Car #4]

@Fast340cuda Would this work? It came off a 72 Satellite with disc/drum.