mopardemon
Well-Known Member
Looking for a hydraulic roller cam, my set up is
trick flow 240, max valve lift 680
victor intake
Quik fuels Q950 carb
Harland sharp 1.6 roller rockers
stroker kit from 440 source 4.350 bore 4.250 stroke
compression is 10.6-1
comps recommendation was custom Grinde
at 50 int 252 ext 262
lift with a 1.6 rocker int 640 ext 672
lsa 12
4 speed 3.54 in the back also have a 4.10
28 inch tire
street strip car
any other suggestions would be great thank you
trick flow 240, max valve lift 680
victor intake
Quik fuels Q950 carb
Harland sharp 1.6 roller rockers
stroker kit from 440 source 4.350 bore 4.250 stroke
compression is 10.6-1
comps recommendation was custom Grinde
at 50 int 252 ext 262
lift with a 1.6 rocker int 640 ext 672
lsa 12
4 speed 3.54 in the back also have a 4.10
28 inch tire
street strip car
any other suggestions would be great thank you