Can someone tell me what this is

[Dave6T4]

Spindles are reversible side to side with no geometry change. All you have to do is change location of brake line bracket.

 

[Orig69]

That looks like the drivers side lower control arm.

 

[RemCharger]

Hat off to all y’all seen something wrong , it’s LCA bent like horse shoe ,, rebuild kits not going to help this , hard to get picture

View attachment 1451153
Sucks but at lease I know one of her troubles

Glad to see you found it!!

 

[Bonehead70GeTeX]

The one the the left looks bent badly

Ya bent bad , I didn’t notice till I was going clean it up and remove old bushing , The torsion Bar was hard to remove on that side also .
Guess I’m in the market for 1970 LCA

 

[ckessel]

Have a look at the k-frame too where the LCA shaft goes through. Look for cracks, wallowing out etc. Another known problem area.

 

[Bonehead70GeTeX]

Have a look at the k-frame too where the LCA shaft goes through. Look for cracks, wallowing out etc. Another known problem area.

Looks ok best I can tell , cleaned and didn’t see any sign of damage , the new shaft fitts snug

 

[fj5gtx]

Seems to be one on ebay, not the cheapest but at least it doesn't look rusty.

Mopar #2535367 1970 Dodge, GTX, Charger B-Body Left Lower Control Arm | eBay

 

[Bonehead70GeTeX]

Seems to be one on ebay, not the cheapest but at least it doesn't look rusty.

Mopar #2535367 1970 Dodge, GTX, Charger B-Body Left Lower Control Arm

Ya I seen a set on there for 350 , money I hadn’t planned on spending , but you’ll have that ,

 

[pro451bee]

Id rather have Qa1 than pay that price for who knows wat

 

[fj5gtx]

Id rather have Qa1 than pay that price for who knows wat

Yeah, unless you really want it to look original. Also, not sure you can use the 70 sway bar on that one..

SummitRacing : Works with the E-Body sway bar or with the 1971-72 B-Body sway bar. Recommended for 1962-70 B-Body applications without a sway bar or with the E-Body sway bar and QA1 K-member QA1-52315

 

[Bonehead70GeTeX]

Iv already got the rebuild kit , so I’m going use it with original LCA, I found a set on eBay they look ok OEM Mopar 1970 B & E Body Lower Control Arms RT & LT With Sway Bar Mount F/S | eBay

 

[Bonehead70GeTeX]

Stiffing plates on , rattle paint , One piece at a time

 

[Bonehead70GeTeX]

Slow going , working overtime saving coupons, inline brake s/s lines , in the mail , hope in the next week or two can come up with brakes ,
Most of my troubles I create myself by getting in a hurry , trying to save money, working with what i got , not this front end build going to take my time , get all my parts. If I don’t have money ,wait till I do ,, that’s where I’m at now on hold , man I’d love to start bolting parts on , lol