CLIP THAT HOLDS REVERSE LIGHT WIRE HARNESS ON BELL HOUSING

[Michael Maresca]

Hello All, Here is a topic that goes round and round. I want to install my reverse light wire harness onto my 1967 GTX 440 4spd. surely this has been done by many here. Can anyone please tell me what the easiest way to do this is?

Also, just to be clear, the only problem I would need help with is how to get the top right bolt out from the Bell housing.

 

[pnora]

Hello All, Here is a topic that goes round and round. I want to install my reverse light wire harness onto my 1967 GTX 440 4spd. surely this has been done by many here. Can anyone please tell me what the easiest way to do this is?

Also, just to be clear, the only problem I would need help with is how to get the top right bolt out from the Bell housing.

You can reach them going over the top of the motor with the right wrench. Or a 9/16 swivel socket on a 3 foot extension from underneath.

 

[Bird 426]

Define right bolt. Someone has a diagram, I have seen it. One at the bell and two across the top of the trans shift cover.