Custom MSD advance bushings

[hunt2elk]

In MSD's kit, the biggest bushing gives 18 degrees. I have a custom made 14, but would like a 16. Anybody know of a source for one of those?
MSD Ignition 8464 MSD Advance Kits | Summit Racing for reference.

 

[493 Mike]

Anyone with a lathe and dimensions should be able to turn one.
Mike

 

[snakeoil24]

Distributors by joe

 

[BIG-A]

I turn my own on the lathe.

 

[hunt2elk]

Distributors by joe

Can't find anybody by that name on the internet. Do you happen to have a link?

 

[hunt2elk]

I turn my own on the lathe.

Yeah, that one tool I wish I had in my garage. You have any 16's you would want to sell?

 

[BIG-A]

sent you a message

 

[Geoff 2]

Adv/ret the initial timing 2* & use the bushing you have. The 2* will not make any difference you can feel.

 

[Crackedback]

Bummed I lost my CNC contact to make these... UGH...

Before I had that contact, I used to make them with a hillbilly lathe... a flat vile in a vise, mandrel in a drill, holding a nut with proper ID... Yeah, top shelf machining processes!

There are also some raw bushings out there that are very close on the ID, hone it, with the OD being spot on for the 14*.