SOLD DANA 60 4 SPEED DRIVE SHAFT

[ROB SHARON]

1970 orginal 4 speed Dana Drive shaft. Asking $475.00

 

[mrhemi]

Dodge or Plymouth? I believe they are different lengths.

 

[ROB SHARON]

Dodge or Plymouth? I believe they are different lengths.

Plymouth

 

[penstar4ever]

Still have driveshaft?

 

[ROB SHARON]

Still have driveshaft?

Yes

 

[Bold & Old]

What is the difference between the Dana and the moper 8 3/4 rear end with the 4spds length?

 

[mrhemi]

What is the difference between the Dana and the moper 8 3/4 rear end with the 4spds length?

It has been awhile since I have had two side by side, but I believe the Dana driveshaft is approx. 2" shorter.

 

[BB14404SPD]

What is the difference between the Dana and the moper 8 3/4 rear end with the 4spds length?

Dana 60 should be 50.96"
8 3/4 is 52.07"
Both measured center to center using u joint mounts

 

[ROB SHARON]

The Plymouths Drive shafts are 50.39 inches

 

[Bold & Old]

The Plymouths Drive shafts are 50.39 inches

I am not a expert but want to understand...

Dana driveshafts 1966 thru 1971 are the same size for all B bodies?

8 3/4 driveshafts 1966 thru 1971 are the same size for all B bodies?

so why is does your drive shaft have different measurements?

Thank you sir:

 

[Fran Blacker]

I am not a expert but want to understand...

Dana driveshafts 1966 thru 1971 are the same size for all B bodies?

8 3/4 driveshafts 1966 thru 1971 are the same size for all B bodies?

so why is does your drive shaft have different measurements?

Thank you sir:

Dodges have a 1" longer driveshhaft and Dana's use a shorter driveshaft than a 8.75.

 

[chargervert]

The front leaf spring mounting brackets are 1 inch longer on the Dodge B body cars,117 inch wheel base,verses the Plymouth B body cars,which have a 116 inch wheel base.

 

[68GTX4SPEED]

Difference between a Dana 60 and a 8 3/4 is 1.14".

 

[Bold & Old]

Difference between a Dana 60 and a 8 3/4 is 1.14".

Hello sir.... is that consistent with all 1966-71

Being new to Mopars are we measuring the shaft with out the U joints?

Thank you....

 

[Fran Blacker]

Center to Center on u-joints.

 

[Bold & Old]

Center to Center on u-joints.

Thanks Fran

 

[68GTX4SPEED]

Hello sir.... is that consistent with all 1966-71
That's the only number I know about.

 

[ROB SHARON]

Bump

 

[Cranky]

Y'all please read the rules for placing AND commenting on classified ads. Thanks.