Data Plate
Well-Known Member
Would the length of the drive shaft on a 69 hemi Roadrunner be the same for a automatic and a 4 speed car or are they different lengths ?
Drive Shaft
- Thread starter Data Plate
- Start date
- Local time
- 12:11 PM
- Joined
- Feb 22, 2013
- Messages
- 4,126
- Reaction score
- 5,445
- Location
- The Red Anvil Dog House
Pretty sure they are different plus it depends on what differential is in the car. I would assume a Dana if it's a true Hemi car.
The internet is your friend. At the end of the day best practice would be to measure your particular set up and have one built to fit.
The internet is your friend. At the end of the day best practice would be to measure your particular set up and have one built to fit.
Data Plate
Well-Known Member
ok thanks and yes a Dana
R/T Boy 67
Well-Known Member
- Local time
- 11:11 AM
- Joined
- Apr 23, 2018
- Messages
- 1,969
- Reaction score
- 2,140
- Location
- Nanaimo B.C. Canada
If both have a dana, then they are the same.
- Local time
- 1:11 PM
- Joined
- Aug 5, 2011
- Messages
- 4,019
- Reaction score
- 6,080
- Location
- Lisle, HELLinois!
Last edited:
- Local time
- 1:11 PM
- Joined
- Aug 5, 2011
- Messages
- 4,019
- Reaction score
- 6,080
- Location
- Lisle, HELLinois!
The chart shows 50.39 length for both 4 speed and auto! Same part number too. What a coincidence.
Data Plate
Well-Known Member
great thanks
Similar threads
