Rd 92 west
Well-Known Member
I have a sept 2nd 66 built 67 belvedere 2
I bought it as a assembly project.
I have a 67 parts car built in spring of 67. Also a 67 coronet for reference.
It's the brake line that goes to the right front wheel or mainly the routing around the steering column and to the distribution block.
My parts car and coronet have a clip that attaches with a screw to the inner fender. My finger points to the spot.
The red car dont have a hole drilled for the screw.
I'm wondering if being built sept 2 of 66 makes this car similar to a 66 model that never had the clip. I've seen a 66 car with the single line master cylinder.
I the 2nd picture it shows only 2 bend over clips that hold the line to the firewall, instead of 3 clips that a 67 is supposed to have.
Does anyone have knowledge and pictures of what is proper regarding the line to the passenger side front wheel
Thanks
I bought it as a assembly project.
I have a 67 parts car built in spring of 67. Also a 67 coronet for reference.
It's the brake line that goes to the right front wheel or mainly the routing around the steering column and to the distribution block.
My parts car and coronet have a clip that attaches with a screw to the inner fender. My finger points to the spot.
The red car dont have a hole drilled for the screw.
I'm wondering if being built sept 2 of 66 makes this car similar to a 66 model that never had the clip. I've seen a 66 car with the single line master cylinder.
I the 2nd picture it shows only 2 bend over clips that hold the line to the firewall, instead of 3 clips that a 67 is supposed to have.
Does anyone have knowledge and pictures of what is proper regarding the line to the passenger side front wheel
Thanks