Engine Startup without torsion bars?

[wsutard]

My torsion bars won't get here till next Wednesday. I need to fire up my engine for a cam break in. Will I have issues if I put it on the ground and run the engine without torsion bars?

I'm guessing no but wanted to ask anyway.

 

[1967coronet440]

I've never done it but I don't think it would be an issue if your only breaking in the cam

 

[kiwigtx]

Will I have issues if I put it on the ground and run the engine without torsion bars?

Should be fine inside the car - this guy doesn't run any torsion bars....

 

[Fran Blacker]

If I was going to do that block the car on the frame rails at ride height.

 

[not so famous bob]

If I was going to do that block the car on the frame rails at ride height.

dam, wouldn`t the car go plumb tot he ground ?

 

[HEMI-ITIS]

The car would sit on the bump stops on the control arm,personally I would have the car on jackstands.

 

[MarPar]

Should be fine inside the car - this guy doesn't run any torsion bars....

looks like he runs a solid front end

 

[wsutard]

I think I will just wait till the torsion bars arrive. I will have more competent help then as well.

 

[MarPar]

I think I will just wait till the torsion bars arrive. I will have more competent help then as well.

discretion is the better part of valor...