exhaust system for my 318 coronet 500

[mightymopar]

Can anyone tell me where I can go to get a dual exhaust H pipe system for my 318? No headers, just want from the manifolds back to the rear, including performance mufflers. Called Gardner and a few others but most are only building Hemi and 440 pipes.

 

[RustyRatRod]

Probably gonna need to get something custom bent at a local muffler shop.

 

[mightymopar]

kinda what I figgered

 

[Budnicks]

Try Accurate Exhaust Products, they are Mopar exhaust specialist, or TTI Exhaust maybe, neither will be cheap, but both great fitting & high quality products... www.accurateltd.com or www.ttiexhaust.com

 

[Cranky]

There's no muffler shops in your area that can do a complete system?

 

[1969 Hemi RTs]

my 318 is an H pipe system. i also used flowmaster mufflers. stock tailpipes n tips from my R/T. had the head pipes and h pipe custom built. at a local shop. love it. I could not find any one who had a system., so building my own was the only option! no under car pics but this one from rear.

 

[Dako]

Amazing, isn't it? 318s were one of the most widely used motors, but were typically equipped with a single exhaust. Since there are no 'factory spec' measurements for head pipes for a dual system, nobody produces systems starting at the manifolds. I realize there are a few variances in manifolds and cars (A & B bodies; 2 door & 4 door; etc.) but damn, as an exhaust sytem manufacturer I would see this is a large open market just waiting to be exploited.

 

[mightymopar]

I talked with the folks at Gardner Exhaust, nice guy to talk. He said he could do it if he had an old system to copy. I have half a mind to take mine to them. They are about 4 hours from me, seems kinda desperate though.

 

[mightymopar]

Checked with Monroe Muffler this morning, manager said somewhere between $250 and $300 without mufflers, didn't seem too bad.

 

[terzmo]

TTI...excellent BUt $$$$$$$$$$