Front Sway Bar Mounting Through K-Member

[Moparfiend]

I just purchased a factory mount front swaybar that I assume fits through the K-Member. My Satellite never had one so I have never seen how they get mounted. I am in the process of welding the tabs on the lower control arms.
My question is where/how does the swaybar mount to the K-Member? Any pictures or drawings would be most helpful. I fount two holes on each side of the K-Member but not sure if those are the ones for the hardware.
This is what mine looks like:

Thank you in advance for your help!

 

[70 sublime]

Is your car a 70 ? 68 69 mounted under and not through

 

[moparedtn]

Here's the nasty old originals on Fred before I got under there and re-did everything (he's a 1968, recall):


Hope that helps?

 

[RemCharger]

There was a recent thread about this with pictures
Post in thread 'Adding Sway Bar Tab to Lower Control Arm' Adding Sway Bar Tab to Lower Control Arm

 

[dadsbee]

Talladega or Bust - 1970 Super Bird Cleanup

 

[T2R9]

Those two holes you are pointing to are the mount holes for you 70. I posted a picture of one mounted in your last thread.

 

[Moparfiend]

Is your car a 70 ? 68 69 mounted under and not through

1970

 

[Moparfiend]

There was a recent thread about this with pictures
Post in thread 'Adding Sway Bar Tab to Lower Control Arm' Adding Sway Bar Tab to Lower Control Arm

Thank you. Yes I started that. The information I am looking for is how the swaybar mounts to the K-Member.

 

[T2R9]

Here is the pic of a factory one mounted.

 

[70 sublime]

found a couple pictures from working on my 70 Charger
You can see the holes and the other picture has a small piece that goes across the holes so the bracket can mount the sway bar to
I did not take any pictures from the bottom

 

[Moparfiend]

Awesome guys thanks a million! So the holes I pointed out are correct and I don’t need to drill any thank god lol. Ge would be nice to use factory style brackets as the plates that come with the kits look cheeky.

 

[R413]

Same brackets on E body and 71 B Body. Not hard to find. BB and SB all the same

 

[T2R9]

Show us what came with your bar. The Hellwig ones I have used are pretty beefy.

 

[Moparfiend]

Show us what came with your bar. The Hellwig ones I have used are pretty beefy.

I just purchased the PST SB today so when it comes I can post. Setting up for improvement on the LCA and adding the swaybar bracket.

 

[Moparfiend]

I just found an image of a bbody install using the same kit. This:

 

[Moparfiend]

PST front sway bar issue

For others that may follow..

 

[dadsbee]

I just found an image of a bbody install using the same kit. This:
View attachment 1796606

That is a 68/69 K frame, not a '70!

 

[Moparfiend]

Hold on that may be a bbody and a PST swaybar BUT ITS NOT GOING THROUGH THE Kmember. Must be the aftermarket type?

 

[Moparfiend]

That is a 68/69 K frame, not a '70!

That explains that thanks Wayne for being the voice of reason lol

 

[Moparfiend]

Ur reason and knowledge lol sounds like the Wizard Of Oz