gill4321
Well-Known Member
Hi good folks of FBBO,
I will be posting build pics on this thread along with questions since its my first mopar build. I recently got my 440 block back from the Machinist (which took a year). This place was so so. The stroker kit is from 440 source. My plans are for a mild 512 stroker that tickles the 600hp mark. 10.5-1 Compression with trickflow 240 heads. Haven't decided on a cam yet. My first question will be along with pictures. The cam bearing that also has the oil holes for the heads seems to be a little miss aligned and need some advice on how to resolve the issue. Any questions or Comments welcome.
I will be posting build pics on this thread along with questions since its my first mopar build. I recently got my 440 block back from the Machinist (which took a year). This place was so so. The stroker kit is from 440 source. My plans are for a mild 512 stroker that tickles the 600hp mark. 10.5-1 Compression with trickflow 240 heads. Haven't decided on a cam yet. My first question will be along with pictures. The cam bearing that also has the oil holes for the heads seems to be a little miss aligned and need some advice on how to resolve the issue. Any questions or Comments welcome.