Just finished up on the transmission cooler install.
It's a 727. No swap. I put it in front of the radiatorVery nice. Uh, we need some background information though. What transmission? Are you doing a swap of some kind?
727 no swap . Going to do an electric fan some time down the roadVery nice. Uh, we need some background information though. What transmission? Are you doing a swap of some kind?
The brackets are 1 1/2" x 3/4" aluminum and the top piece is 1 1/2" bent that's for the top bracket up 3" then bent to 1". I drilled and tapped 5/16×24Hard to really tell how you mounted it I’d like to repopulate those brackets if you could take a better picture please
The brackets are 1 1/2" x 3/4" aluminum and the top piece is 1 1/2" bent that's for the top bracket up 3" then bent to 1". I drilled and tapped 5/16×24
No I took it off of the radiator .Are you going through the radiator first, and then through the cooler like the factory did?
Yes it is a mishimoto transmission cooler.What is the brand of the cooler? I see an “M”, or is that a W? Looks like a well thought out installation. Thanks.
Thank you it took me awhile to get it figured out..Yes it is a mishimoto transmission cooler.
That looks nice. I like the lay outNice. That is the same style of cooler I'm using for my 65 but x3. Trans, engine, p/s. They are very efficient. I think its Mocal or Setrab that makes them. Got my units from Earls.
View attachment 1358912
ThankxThat looks nice. I like the lay out