• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Installed transmission cooler

Mikey59

FBBO Gold Member
FBBO Gold Member
Local time
3:05 PM
Joined
Sep 3, 2020
Messages
58
Reaction score
41
Location
Cottage hills Illinois
Just finished up on the transmission cooler install.

20220930_105454.jpg


20220930_105449.jpg


20220930_105421.jpg


20220930_105423.jpg
 
Looks nice! Can’t tell exactly where it’s mounted tho. I was thinking of putting one under my battery tray. With a fan on it of course.
 
Very nice. Uh, we need some background information though. What transmission? Are you doing a swap of some kind?
 
Hard to really tell how you mounted it I’d like to repop those brackets if you could take a better picture please
 
Last edited:
Hard to really tell how you mounted it I’d like to repopulate those brackets if you could take a better picture please
The brackets are 1 1/2" x 3/4" aluminum and the top piece is 1 1/2" bent that's for the top bracket up 3" then bent to 1". I drilled and tapped 5/16×24
 
Are you going through the radiator first, and then through the cooler like the factory did?
 
What is the brand of the cooler? I see an “M”, or is that a W? Looks like a well thought out installation. Thanks.
 
Nice. That is the same style of cooler I'm using for my 65 but x3. Trans, engine, p/s. They are very efficient. I think its Mocal or Setrab that makes them. Got my units from Earls.

EDFFCB84-217F-41E2-8F5E-68CE01830A73.jpeg
 
Auto Transport Service
Back
Top