Let's post some fun stuff here

[65Bel]

 

[Timmayy]

I bought one of these and what an overpriced POS it is. I don't know what magic they used in that video but you will be disappointed when you see it.

 

[Timmayy]

 

[polywideblock]

 

[Timmayy]

 

[polywideblock]

 

[Auggie56]

 

[junior340]

Wow there's some twisted humor on here.
Thank you
Carry on

 

[polywideblock]

 

[polywideblock]

 

[polywideblock]

 

[YY1]

One of the few Larson flubs.

That operation is actually more difficult than as illustrated because the "standard" screw does not capture the blade of the driver.
IE- the slot goes all the way across, which could cause a less careful "operator" to slide the driver off the screw.

You know you've seen that happen.

 

[Basket case]

Got the scars to prove it

 

[Timmayy]

 

[Scott Engelhardt]

Slotted screws are so messed up. The slot in the screw has straight sides and the driver is tapered, unless you have a hollow ground screw driver

 

[Dave6T4]

Up here in Canada, we have square drive Robertson screws. They come in 3 different drive sizes according to size of screw. These are used mainly in furniture and house construction.

 

[Photon440]

Up here in Canada, we have square drive Robertson screws. They come in 3 different drive sizes according to size of screw. These are used mainly in furniture and house construction.

Six sizes for Robertson. I use them all the time, wonderful drivers.

 

[YY1]

Not a big square drive fan. Especially those square/ not quite Phillips combo heads.

Give me a correctly sized and "grip tip" Phillips driver in a correctly machined Phillips screw.

 

[Auggie56]

 

[Photon440]

Does anyone remember these limited edition Cheerios? Instead of 'O's they used 3 and 4 for cereal shapes. This was #1, apparently they made more in this series.