As the title says I'm looking for good "how to" info to mini tub my '69 RR. Lots of photos, measurements, tips, tricks, etc..
View attachment 213648
- - - Updated - - -
The GTX got some color today!!! Just the trunk, but still excited to see some B5 on the car :headbang:
I'm back! I used the US Car Tool kit and rolled a step in the piece to give it a nice flat surface.
Depends if you want to save the original inner tub or not. Might be easier to scrap the OEM tub and buy a new one.Couple questions ...
There is a stamped dimple around the inner tub - did you move that whole piece over or just cut it out?
Yes just cut them out.
Did you trim the lip off the frame rails and weld the tubs to the side of the frame rails?
How wide is the step you rolled?
Yes trimmed the lip. About 3/8-1/2 lip. If I remember right there's a rolled lip next to where the 2 halves come together, that's where I put my splice.
It seems to me that with the car intact it would be a bitch to get at all the spot welds to remove that inner tub.