63hemipolara
Well-Known Member
If anyone knows of one at a reasonable price please le me know. :grin:
Buying a used manifold, unless bone stock, going on bone stock FULL UNCUT dimensioned parts, is a very hard thing to do.
Hogans has 10-12 dimensions that are needed to make a new one to fit the individual motor, same is true for a used one.
9 TIMES OUT OF 10 A USED MANIFOLD WILL NOT FIT A USED REBUILT MOTOR....
Buying a used manifold, unless bone stock, going on bone stock FULL UNCUT dimensioned parts, is a very hard thing to do.
Hogans has 10-12 dimensions that are needed to make a new one to fit the individual motor, same is true for a used one.
9 TIMES OUT OF 10 A USED MANIFOLD WILL NOT FIT A USED REBUILT MOTOR....
If you are going to paint a picture of DOOM you should also educate everyone to the fact that it is not that big a deal to build a manifold up with weld in order to cut it to need.
Steve great minds think alike as I want to put a crossram on my 63 to get the WOW Max Wedge factor. I will have to wait until my funds get better. They sell a new crossram for the standard port wedge head's for about $1,400 just for the intake. Then I will need the carbs and linkage !! Ron
I put a A&A on mine for the original look, plus I heard that the MP ones are hard to seal.
Gene, any divability issues?