Looking Front and rear outer window molding installation tips.

[70ChargerRT]

Just got my front windshield and back glass installed. Is there any certain way the front and back moldings need to go in to make it easier? Any tips or tricks would be appreciated.

 

[dadsbee]

Ya.. in the order it slips together. Lay it out on a table. Lowest "male" in the group goes first on the back. Front a similar deal. Don't forget the "tabs" that screw to the A pillar and slip into the lower trim pieces.

 

[70ChargerRT]

Ok. So In the rear glass the very bottom hooks in first. Do I hook one side first and then work my way in a circle ending in the corner or slide both corners on then the last piece be the middle top?