Max Wedge Gene - New Member

[Max Wedge Gene]

I have heard so much about this site & finally found the time to join. I'll figure out this post thing in time & add all the facts & pictures about my 2 cars. The 1st 65 Belvedere II 2 door hardtop started as an original big block 4 speed car that I bought from the original family owners. The motor was replaced with 472 cid Max Wedge, Hemi 4 speed & 3.73 Dana 60. The car has been at E-Town, Atco, Island, Maple Grove & Carlisle. The 2nd 65 is a Belvedere I 2 door post car that has a complete genuine 426 Race Hemi built on Dec 14, 1964 backed by a Hemi 4 speed & 4.30 gears in an 8 3/4 rear. It is in for paint to be followed by the final assembly in early 2011.

Can't wait to have the Hemi car complete after a 4 year project.

 

[440gtx]

Nice car Welcome

 

[HEMI-ITIS]

Welome aboard!Thought you were a member here already.Left some drool on the fender @ Carlisle in '08.Stood out in thr crowd.I also :munky2:dug the red '63 bigtime!!

 

[RUMBLON]

very cool set of cars very cool !!!!!!

RUMBLON

 

[detmatt1]

Very nice, welcome to the site, can't wait to see the other one as it gets finished.

 

[64BEL]

Welcome, Gene. Great cars!

 

[wannadrag]

Welcome

 

[SUPERSTOCKRACER]

I know the car very well, we talked at Carlisle back in 08.
Welcome aboard. I love the car.

 

[Max Wedge Gene]

Thanks for the warm welcome

It was so nice to hear from friends from the past & I look forward to meeting new ones in the future. Sorry the picture of the hemi was incorrect, but I have the right one now. Enjoy.

 

[roadrunnerman]

welcome,it's been a couple yrs since i was able to get to carlisle.

 

[HEMI-ITIS]

It was so nice to hear from friends from the past & I look forward to meeting new ones in the future. Sorry the picture of the hemi was incorrect, but I have the right one now. Enjoy.

Absolutley STUNNING!!!!!!!!!!!!!!!

 

[SUPERSTOCKRACER]

It was so nice to hear from friends from the past & I look forward to meeting new ones in the future. Sorry the picture of the hemi was incorrect, but I have the right one now. Enjoy.

max wedge gene where did you get those hemi s/s spark plug wires. i need a set badly.

 

[Max Wedge Gene]

64-65 Spark Plug Wires

The tan/brown bakelite insulators are very tough to find, the black top tube seals are around. I could make a set with the plastic street hemi insulators & all straight ends at the distributor. I use wire with a very low resistance, 150-200 ohms per foot & just the right color. Let me know what you want.

 

[SUPERSTOCKRACER]

The tan/brown bakelite insulators are very tough to find, the black top tube seals are around. I could make a set with the plastic street hemi insulators & all straight ends at the distributor. I use wire with a very low resistance, 150-200 ohms per foot & just the right color. Let me know what you want.

Max Wedge Gene, I'm looking for exactly what you have there!
if you could make me a set, i'll pay you right away. let me know thanks.