milodon six pack oil pan help

[mopardemon]

does anyone know if the 440 source pan and the milodon six pack pan are the same or summits hemi oil pan

Summit Racing™ Stock Replacement 426 Hemi/Mopar 440 Oil Pan SUM-G3511​

the same as the milodons, I have a 505 stroker and cant find the milodon six pack oil pan anywhere
or has anyone used 440 source pan or summits pan in a stroker

 

[PurpleBeeper]

I don’t know your exact answer, but here is what I learned when I was looking for a “six pack/Hemi” pan…..you need to make sure the pan & oil pickup are made by the same company. When I tried to use mix & match pan and pickup, it didn’t fit & the pan wouldn’t seat

 

[mopardemon]

what im asking is will those other pans work with a stroker

 

[Bird 426]

Call Milodon on their pan. Plus, make sure you get the right pick up. Hemi is 1/2". If you get a windage tray, again make sure things are the same. You can not just bolt it on and go. Will have to check clearances. That means a trial fit with assembly rotated.

 

[mopardemon]

already called milodon no pans till new year, just looking to see if i can use the other pans with there setup

 

[451Mopar]

I bought a 440 source 6 qt oil pan and it looks just like the Mopar Performance ones I have used before.
I haven't installed it yet, still getting parts for the stroker. I can't comment on the oil pickup fitment. I think if your staying with the stock 3/8" pickup that matches the oil pan it should be OK. I usually have to heat and bend pickups to get the exact fitment.
Because I am going 1/2" pickup with main cap girdle, I am going to start with the deeper pickup and modify it as needed.

 

[BSB67]

I bought a 440 source 6 qt oil pan and it looks just like the Mopar Performance ones I have used before.
I haven't installed it yet, still getting parts for the stroker. I can't comment on the oil pickup fitment. I think if your staying with the stock 3/8" pickup that matches the oil pan it should be OK. I usually have to heat and bend pickups to get the exact fitment.
Because I am going 1/2" pickup with main cap girdle, I am going to start with the deeper pickup and modify it as needed.

I bought two pick-ups and made one long enough for the girdle and scraper.