I'm installing the new plug wires on my 69 383 Sport Satellite. Some of the boots are challenging to get to "click" onto the plug, due to tight access, particularly on #1 and #3, because of battery tray and power steering box, coupled with the TTI headers. I've applied small amount of dielectric grease to the ceramic plug portion, which helps with pushing the boot on, but don't hear an audible "click" onto the plug on some. Ive tried to check if they are indeed on by lightly pulling to be sure, and lightly wiggle side to side to be sure no movement, but hard to tell with some that I have them fully seated, and connected onto the plug, due to the tight work space. Any suggestions are welcome. Tried to attach a couple photos showing the problem areas, but keeps saying file too large. I'll try to figure that out but in the meantime, THANKS in advance for any tips/suggestions.