My 66 Satellite street car project

[2quick]

Nice work, do you need Amy parts for the wipers, I pulled all the hardware for mine it’s not going back in, I also have the tubing and connectors for washer fluid.

View attachment 566428 View attachment 566429 View attachment 566430 View attachment 566431

Thanks for the heads up but I already had the wiper arms polished and I'm not using the washer nozzles.

 

[Moparstyle]

Car is looking great

 

[2quick]

I few years ago I built the support frame for the fuel cell and have recently got back to finishing it. It's made from pretty thin wall rectangular tube and it's a lot lighter then it looks. I decided to place a Derale remote mount trans cooler behind the rear axle so I integrated some brackets for it to the frame. Also its going to support a Holley Billet Dominator fuel pump and filter setup. It's currently in bare metal but going to powder coat today. I hope to install this weekend and start getting the fuel lines moving toward the front of the car and some of the wiring in.

 

[2quick]

Nice work, do you need Amy parts for the wipers, I pulled all the hardware for mine it’s not going back in, I also have the tubing and connectors for washer fluid.

View attachment 566428 View attachment 566429 View attachment 566430 View attachment 566431

Would you have one of these?

 

[1967coronet440]

Would you have one of these?

View attachment 567155

I believe I have an extra, I’ll have to double check when I get by the shop.

 

[2quick]

Finished up the fuel cell this weekend. Fits really good. I'll get some pics of the underside later.

 

[2quick]

Some underneath shots.

 

[2quick]

got some more stuff done over the last couple weeks.
Headliner went in!

 

[2quick]

Wiper arms, pivots and wiper motor rebuilt and installed.

 

[2quick]

Got some stuff back from the powder coater.

 

[2quick]

Some outdoor Pics from a couple weeks ago. Car is a bit further along then these pics show.

 

[Moparstyle]

Some outdoor Pics from a couple weeks ago. Car is a bit further along then these pics show.

View attachment 584847 View attachment 584848 View attachment 584849 View attachment 584850

Love it she looks beautiful

 

[Brandy]

Got some stuff back from the powder coater.

View attachment 584838 View attachment 584841 View attachment 584844 View attachment 584846

Is that intake similar to an M1?

 

[Brandy]

Very nice.

 

[1967coronet440]

Looking great, keep up the good work

 

[2quick]

Is that intake similar to an M1?

I believe it only fits 440-1 heads with max wedge ports

 

[Moparstyle]

Finished up the fuel cell this weekend. Fits really good. I'll get some pics of the underside later.

View attachment 570838 View attachment 570839 View attachment 570840 View attachment 570841 View attachment 570842

Did you build your fuel cell

 

[CudaChick1968]

Got some stuff back from the powder coater.

View attachment 584838 View attachment 584841 View attachment 584844 View attachment 584846

I hope the machined finish on the Indys was cleared ... but it doesn't look like it.

 

[2quick]

Did you build your fuel cell

I started with a RCI 20 Gallon off ebay and had a friend of mine at a sheetmetal shop cut it up and rework it. It's now only about 16 gallons.

 

[2quick]

I hope the machined finish on the Indys was cleared ... but it doesn't look like it.

This is a local shop for me and he said he was going to clear the the lettering before laying on the black but it sure doesn't look like it to me. He wasnt there for me to ask what happend when I picked them up. Not sure what to do with it now?