• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

My new to me 64 Polara

I seem to be on a roll buying a few old (quality) parts lately. I was looking at lower ball joints which are on my to-do list. I used to sell TRW which were top notch. I just bought a chassis parts catalog so I can look the numbers up. I have a TRW Performance parts catalog for engine parts. I also have a few Filko Ignition parts catalogs for all that good stuff.
 
Hey @icetech, I tried a little trick I heard from you. You used the fuzzy side of Velcro in your window channels. My seals are completely gone and the door glass rattles really bad. I had some white Velcro (wrong color but just an experiment) I cut a couple of 2" long pieces and stuck them in the channel and rolled the window up. Rattle 99% gone! Just a test that worked.

20251024_144320.jpg


20251024_144346.jpg
 
Hey @icetech, I tried a little trick I heard from you. You used the fuzzy side of Velcro in your window channels. My seals are completely gone and the door glass rattles really bad. I had some white Velcro (wrong color but just an experiment) I cut a couple of 2" long pieces and stuck them in the channel and rolled the window up. Rattle 99% gone! Just a test that worked.

View attachment 1937156

View attachment 1937157

awesome... And i think i got that trick from Khryslerkid... i can't stand doors that rattle when they close, if you do the whole channel make sure to use something to hold the velcro really tight in place while the adhesive sets up, my drivers one gets hard to roll up bout 3/4 of the way
 
I drove around and took some fall pics yesterday. The ol' girl makes me smile.

20251024_125957.jpg


20251024_130551.jpg


20251024_130633.jpg


20251024_133232.jpg
 
Auto Transport Service
Back
Top