• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

My Project

Law69GTX

Active Member
Local time
11:57 AM
Joined
May 16, 2020
Messages
40
Reaction score
42
Location
Georgia
Getting there just dropped motor in this week my first Mopar .

Screenshot_20220501-105441_DuckDuckGo.jpg 20220430_175035.jpg
 
Looks like a decent project. Nice.
 
Since you've got the hood off would you mind taking some measurements for me?

1) width across the hood opening - both front and back
2) width between the inner fenders at the front - about 3" back from the rad support where you can easily read the tape

I'm having some fitment issues and wondering if something got welded out of whack when the new rad support was installed.

Much appreciated if you can do this for me.
 
congrats on the Mopar and hope all gos well with the engine install.
 
Auto Transport Service
Back
Top