trinity250
Member
It looks like I have pretty much everything to do my intake swap on my 67 belvedere II 318 engine. I am going from a 2bbl to Holley 4bbl (600 CFM) my question is not with the intake install its self but with the tranny rod and throttle cable. This new manifold has got to be taller by a few inchs. Will those cables and rods work with the stock mount or do I need a taller mount? I do have the adapters that go on the carb from holley so that should be ok.
Any help would be great I will post pictures if need to help.
Thank you for you help in advance.
Charles
Any help would be great I will post pictures if need to help.
Thank you for you help in advance.
Charles