Need 26" radiator dimensions urgently

[kiwigtx]

Hi guys,
If someone has a 26" radiator from a '68-'70 B-Body laying around loose, I would appreciate getting the actual dimensions from it please. This is for a good friend of mine here, and I don't have access to a similar radiator for a few weeks.

I need the dimensions between the fixing bolt holes - across, vertical and diagonal as well as the overall size of the radiator - vertical and horizontal of the core.

If anyone can help me out, please either post below, or start a Conversation with me - Private message.

Thanks in advance.

 

[BeepBeepRR]

I have a 26 out of a 1971 I would think the dimensions would be the same.. If so I can get those for you pretty easy.
this site says 66/74 and has dimensions for theirs.
https://www.championradiators.com/plymouth-satellite-26-inch-core-big-block-radiator-1966-1974

 

[HEMI-ITIS]

Roger that!

 

[beanhead]

I don't have a factory radiator to check actual core dimensions, but if it helps the mounting holes are:
('68 B-body)
Top holes 27-7/8" apart
Driver side holes top to bottom 14-7/16"
Pass. side holes top to bottom 10-1/2"

Pass. side holes are 1-1/16" from the inside edge of the opening to center of bolt
Driver side holes are 1" inside edge-center of bolt.
(I guess just call those both a 'Chrysler Inch' lol)

 

[kiwigtx]

I have a 26 out of a 1971 I would think the dimensions would be the same.. If so I can get those for you pretty easy.
this site says 66/74 and has dimensions for theirs.
https://www.championradiators.com/plymouth-satellite-26-inch-core-big-block-radiator-1966-1974

Thank you....it's the fixing holes as well which are important.

I don't have a factory radiator to check actual core dimensions, but if it helps the mounting holes are:
('68 B-body)
Top holes 27-7/8" apart
Driver side holes top to bottom 14-7/16"
Pass. side holes top to bottom 10-1/2"

Pass. side holes are 1-1/16" from the inside edge of the opening to center of bolt
Driver side holes are 1" inside edge-center of bolt.
(I guess just call those both a 'Chrysler Inch' lol)

Thanks...that is what I was after.

 

[BeepBeepRR]

Here are some measurements. First picture is center to center on top 2 holes. Picture 2 is from driver side top hole to bottom. Its not exactly a mounting hole on this radiator but centered on it anyhow. and 3rd picture is the passenger side top to bottom.

 

[kiwigtx]

Here are some measurements. First picture is center to center on top 2 holes. Picture 2 is from driver side top hole to bottom. Its not exactly a mounting hole on this radiator but centered on it anyhow. and 3rd picture is the passenger side top to bottom.

View attachment 977535 View attachment 977536 View attachment 977537

Thank you...very much appreciated.