64fury74charger
Well-Known Member
This is my 2nd go round with the hyper spark to have the sniper control timing. I have updated the ecu and hand held with the latest software on a fresh card, set up all the wizard details and there is rpm showing when I try to start it. Still no spark???? Wiring is pretty easy and I have the distributor and coil that goes with the black ignition box so all these pieces should play nicely together. Anyone have any ideas on what I should be looking for or something else??? I have gone over all the basics but nothing is really looking like a problem.
The efi was working great with an MSD distributor and 6AL box previously but of course no timing control. I got the distributor kit because then I don’t have to tear apart a good working distributor. I will be busy with work this week but vacation starts next weekend. Thanks in advance for your help.
The efi was working great with an MSD distributor and 6AL box previously but of course no timing control. I got the distributor kit because then I don’t have to tear apart a good working distributor. I will be busy with work this week but vacation starts next weekend. Thanks in advance for your help.