New Guy from KCMO

[stank468]

The one you see in the picture is just a mock-up. The one that is actually going in the car is a .060 over 354, stock crank, H-beams (modified Pontiac), Hyper pistons, main studs, Pocket ported iron heads milled to a 100cc chamber, oversize stainless valves, stock rocker assemblies, stock oil pump, Isky B777 Solid lifter cam 108 lc, .480 lift, 240 degrees @ .050, adjustable pushrods, Hot Heads intake and 2 600cfm carters. I will have to fabricate the headers and the pan to fit the chassis.

 

[Budnicks]

stank468 maybe you could post this build stuff, over in the General discussion section or Engine Trans & Drivelines &/or the year specific 62-65 B-Bodies forum or in a Members Restorations/build forums here, you'll get allot more views & responses, this Welcome Wagon is mainly for welcoming new members & introductions... Cool project by the way too, I look forward to seeing more...

 

[BBishere2]

First MOPAR project car and you score a HEMI engine - you suck!

j/k!!! - Welcome aboard and congrats! Tons of good info on this site and a great group of people here too.

Looks like a great project and make a bad *** ride! Keep us posted.:icon_cheers:

 

[billc]

Hello from anothe newbe in Tennessee. Welcome.

 

[67440chrg]

You have a great looking project. Hemis always add a great cool factor. Hello from Belton. Look up HPAC its our local Mopar club. Great group of people. Come out to culvers and the big all mopar show at bass pro. Look for a blue 1st gen Charger and say hi.

 

[stank468]

Will Do, Thanks!

- - - Updated - - -

Thanks everyone for the welcome, I think I will take Budnicks direction and start a build thread in the "members restoration build Forum"

 

[killerbee]

Welcome! make sure you join the HPAC Mopar club in KC- They're on the net

 

[Ron Ward]

Hello from Topeka!