NEW GUY SOUTH FLORIDA

[JB Charger]

Just joined. Been watching the forum over time and learned a lot of info, thanks to all that contributed. Seeking more info I have two 69 RT/SE's, both 440HP / Auto / Dana 60. Bought both many years ago, (work and life) slowly working on one and finally getting somewhere. Still a LONG way to go. Attached is a couple photos, nothing to really look at right now. More later.

 

[Mopar Hunter]

 

[RR Fan Dan]

 

[68sprtsat383]

Welcome

 

[69 Sleeper Bee]

North,

Looking good so far !

 

[hugh68charger]

welcome to the party from a fellow south Floridian

 

[polywideblock]

G, day from Australia

 

[copper67sat]

Welcome from just up the coast. Good luck with your projects.

 

[T2R9]

Welcome! Nice work so far!

 

[68gtxman]

Just joined. Been watching the forum over time and learned a lot of info, thanks to all that contributed. Seeking more info I have two 69 RT/SE's, both 440HP / Auto / Dana 60. Bought both many years ago, (work and life) slowly working on one and finally getting somewhere. Still a LONG way to go. So:
Does anyone know what the correct full part number from Dodge should be for the Dana 60, 4:10 Power-Loc? I know the last three digits from the build sheet should be 644. But whats the complete factory part number? Need it for the ID band that goes on the drivers side tube.
Scavenger Hunt $1000.00 finders fee.
Looking for the original engines for both. VIN XS29 L9X XXX990 (Engine and Trans) and XS29 L9X XXX883. So if you know your 440 is an 69 "E" code but not numbers matching, check that VIN stamping. Who knows you just might be a little richer. Attached is a couple photos, nothing to really look at right now. More later.

View attachment 1905048

View attachment 1905049

View attachment 1905050

View attachment 1905051

Welcome!

 

[JB Charger]

Tks to all.

 

[oldbee]

Welcome aboard from Ohio.

 

[68BabyBlue]

Welcome from PA. Looks like you have a great starting point. Good luck on your engine search, reunions do happen. GTX I used to own, previous owner spent a decade searching for the original engline. He found it running on an engine stand at the Carlisle Chrysler show in 1997. I know the story is true, because I was there, and had never seen a running complete Hemi on the field before.

 

[Cranky]

Welcome to the site!!

 

[Fran Blacker]

Welcome from Connecticut. Two Chargers twice the fun and twice the $$$.

 

[mr. b]

welcome to FBBO nice looking charger projects

 

[DeltaV]

Welcome to FBBO from Georgia.

 

[69Bee]

Welcome from AZ...

 

[ckessel]

Welcome from no Gator California.

 

[HD539]

Welcome from Washington State.