• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

New MSD Base Setting

Frank Mopar

Well-Known Member
Local time
7:24 PM
Joined
May 7, 2015
Messages
1,166
Reaction score
1,875
Location
Buffalo, NY
i have a new MSD Pro Billet 8546 on the way for my 440 race car.

Anyone know what springs and spacer bushing to start with to get the 32-34 advance, all in 2500 rpm standard Mopar settings?

Would just like to stab it in one time and not feel like I'm churning butter by the time I'm done.

Thanks ahead of time
 
give MSD tech a call 888-258-3835
 
i have a new MSD Pro Billet 8546 on the way for my 440 race car.

Anyone know what springs and spacer bushing to start with to get the 32-34 advance, all in 2500 rpm standard Mopar settings?

Would just like to stab it in one time and not feel like I'm churning butter by the time I'm done.

Thanks ahead of time
Follow the instructions that come with it, should be a few charts with different combinations for what you want.
 
So what I found and what I did was 14 degrees initial, left in blue spacer for 21 degrees of mechanical advance. Total 35 degrees all in with the two silver springs at 2,000 rpm
 
Auto Transport Service
Back
Top