• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

New thicker steel oil pan!

I have 187 stock 3/8 pickup. Can this be arranger for max wedge pan?
 
Call 440 Source, they will be happy to answer any and all questions that you might have.
 
Last edited:
Received mine today (finally usps) and man these things are nice, heavy gauge, straight stamping. Maybe even I can’t tear up one of these.
 
Dropped one on the 440 block (505 CID) a couple of weeks ago. I didn't measure it, but it's definitely a sturdy pan.
7 QT oil setup... Pan holds (6), plus (1) in the filter. I use a 1/2" oil pickup, also from 440 Source. It came a little long (which is better than to short), so I cut it back a bit and rethread it to get the right clearance height off the bottom of the pan.

View attachment 1848805 View attachment 1848806
I also ordered same pan. What windage tray you use? I have stock and source440, they dont fit
 
Last edited:
I also ordered same pan. What windage tray you use? I have stock and source440, they dont fit
I used the stock 440Source stroker tray...
I just cut the rear center section out since it served no purpose here (as shown in the posted image). 440Source recommends doing the same.
 
Last edited:
Auto Transport Service
Back
Top