Rag Joint supplier for 73 B-Bodies

[YY1]

I might note that some slop in my steering and a slight tendency to wander actually turned out to be toe out.

It was also causing tire wear. That's how I found it.

I built a toe gauge, and it showed about 5/16 out.

Adjusted it to 0-1/16 in and it handles and steers MUCH better.

 

[Nacho-RT74]

https://www.forbbodiesonly.com/mopa...-steering-rag-joint-and-coupler.147177/page-3

Ok it wasn't started by YY1 LOL

 

[bandit67]

The Advance part number is good and mine is supposed to be here next week. Will check it out and see how close it is to my original busted one. I am intrigued by YY1 hockey puck and may order one just to see how it sets up...got me curious now...