raised spindles

[1lundsbee496]

looking for raised front spindles for b body

 

[gkent]

I'm going to go out on a limb by saying I think you mean "dropped" spindles. Magnum Force Mopar 2 inch dropped spindles for Dodge and Plymouth

 

[1lundsbee496]

no.. raised spindles for the gasser look

 

[RemCharger]

Ok. Is this your own idea or have you seen it before.

 

[1lundsbee496]

yes

 

[toolmanmike]

I have never seen them available. Just crank up the torsion bars. (Take the weight off and lube the adjusting nuts. You won't like the ride or handling though.)

 

[Fran Blacker]

In the late 60's early 70's they had front lift kits for GM A bodies Chevelles. It looked like C with square corners. It went on upper ball joint and spindle. Never paid attention how it went together. Wonder whether you could adapt that to work? Systems for raising cars are more sophisticated now.

 

[Jeff Peterson]

 

[toolmanmike]

View attachment 1803741

Nice Gasser but a straight axle and not IFS. And geez, Paint the radiator support black!

 

[Jeff Peterson]

Nice Gasser but a straight axle and not IFS. And geez, Paint the radiator support black!

That's why I posted it, straight axle gasser!

 

[Lefty71]

looking for raised front spindles for b body

Kinda surprised there's NOTHING available for this..... more than a few have asked, but the discussion always goes to ruining your front end alignment with taking the torsion bars to an extreme, or the inevitable gasser look with front leafs. How mauch can be accomplished with blocks under the K frame I wonder, or would even that stress the torsion ends and mounts to a horrible degree???