Rear main replacement

[Orange71SE]

How do I go about replacing the rear main seal on an RB motor with the crankshaft in place?

 

[khryslerkid]

It's actually a "Sticky" on here under "Engine, Trans and Driveline".

https://www.forbbodiesonly.com/mopa...-thread-on-rear-main-seal-replacement.127618/

 

[PurpleBeeper]

Drop the steering drag link at pitman/idler arms, remove pan & replace per instructions...offset the two halves vs. parting line on seal cap & use adhesive at the ends. RTV ONLY along the sides of the cap helps too.

 

[Dipstick]

All good UNLESS it has the original rope seal. Some of us still favor them.