Paul_G
Well-Known Member
- Local time
- 8:08 PM
- Joined
- Dec 24, 2013
- Messages
- 2,098
- Reaction score
- 3,364
- Location
- Surprise, Arizona
Take a look at these please. I think the roller tip is not centered on the valve stem correctly. How can I get the tip to ride in the center? Trick Flow PP240 heads with Harland Sharp rockers made for Eddy and TF heads.
I have the push rod checker tool at 8.785" which leaves about 1 thread exposed below the rocker arm. Right at HS spec.
I have the push rod checker tool at 8.785" which leaves about 1 thread exposed below the rocker arm. Right at HS spec.