side tracked

[steve maluk]

ready to order my tortion bars for my roadrunner 440 to gen 2 hemi this is a weekend warrior car what size . ( No headers stock exhaust no drags no road racing just a good size bar to handle the extra weight )
thanks sjm

 

[AR67GTX]

The PST 1.03” bars work well for most. PST is owned by Kantor Auto now.

 

[Cranky]

ready to order my tortion bars for my roadrunner 440 to gen 2 hemi this is a weekend warrior car what size . ( No headers stock exhaust no drags no road racing just a good size bar to handle the extra weight )
thanks sjm

My first engine swap was from a small block to a 383....didn't even have to adjust the original bars.

 

[steve maluk]

did a little recearch seems 1.03 comes up 1.03 it is / now is there a difference on who makes a better or best bar or all of them made from the same place PST mancini summit etc thanks sjm

 

[AR67GTX]

I would believe there are at least a couple and maybe several makers of replacement torsion bars. I suspect Hotkiss are from a different source. The 1.03” torsion bar size shows up under several businesses so I suspect they are from a common source. But the PST ones have had a lot of popularity on this forum. I have them in my 66 Hemi Satellite and they handle well and ride firm without harshness.