Small Block Stroker almost completed...

[65RoadRacer]

Hey! I never did get your camp specs. Lift & @.050. Also, are the heads ported or box stock?

My cam card is at the shop and I forgot to grab it.
This is the first cam, but it was based on a 1.5 ratio, and my arms are 1.6, so I had to get a new cam, similar specs:

Edelbrock Magnum heads:

 

[rumblefish360]

Holy shhhhhhhhhbyt!
224@050 & .600 lift?!?!

Sorry, I think I may have to get a similar cam on a 108!

Daaaaaaaaaaaaaaaaaaaaaaaaaaaang!

 

[65RoadRacer]

Holy shhhhhhhhhbyt!
224@050 & .600 lift?!?!

Sorry, I think I may have to get a similar cam on a 108!

Daaaaaaaaaaaaaaaaaaaaaaaaaaaang!

The guru at Comp Cams made this grind specifically for this application... I gave him the parameters and the head specs... he designed the cam. I'm going to break in the engine NA before we take it to the next level, he said, "It won't be a fun engine... it's not going to make power like this" I told him I'm running about a 325 horse Poly head, and he said, "Oh, well you'll have a little fun then." LOL

Keep in mind, this is the cam still in the box... when they sent me a set of 1.5 rollers for the magnum head I realize that was going to throw things way off because the Edelbrock head utilizes 1.6 SBC rockers. That would mean something was going to break... so we had to get a different cam grind to maintain these figures.

 

[watermelon]

lookin nice

i’m not sure about the cam n lift stuff

can i just drop off my 440cu with y’all to work your magic on it then i just pick it up a few weeks later?



watermelon

 

[65RoadRacer]

lookin nice
i’m not sure about the cam n lift stuff
can i just drop off my 440cu with y’all to work your magic on it then i just pick it up a few weeks later?
watermelon

LOL... I'm a driver, not a builder, so I gave all the details to the gurus and told them what I'm hoping to achieve and they did the numbers.

 

[65RoadRacer]

Hey! I never did get your camp specs. Lift & @.050. Also, are the heads ported or box stock?

The actual Cam Card for the correct camshaft for you:

 

[65RoadRacer]

A couple more pics of the engine.. .just about ready to get fired up...

 

[wyrmrider]

do you have a dykem stripe on a valve tip? how wide a pattern?

 

[watermelon]

very nice


watermelon