65RoadRacer
Well-Known Member
My cam card is at the shop and I forgot to grab it.
This is the first cam, but it was based on a 1.5 ratio, and my arms are 1.6, so I had to get a new cam, similar specs:
Edelbrock Magnum heads:
Small Block Stroker almost completed...
- Thread starter 65RoadRacer
- Start date
This is the first cam, but it was based on a 1.5 ratio, and my arms are 1.6, so I had to get a new cam, similar specs:
Edelbrock Magnum heads:
rumblefish360
Well-Known Member
Holy shhhhhhhhhbyt!
224@050 & .600 lift?!?!
Sorry, I think I may have to get a similar cam on a 108!
Daaaaaaaaaaaaaaaaaaaaaaaaaaaang!
224@050 & .600 lift?!?!
Sorry, I think I may have to get a similar cam on a 108!
Daaaaaaaaaaaaaaaaaaaaaaaaaaaang!
65RoadRacer
Well-Known Member
The guru at Comp Cams made this grind specifically for this application... I gave him the parameters and the head specs... he designed the cam. I'm going to break in the engine NA before we take it to the next level, he said, "It won't be a fun engine... it's not going to make power like this" I told him I'm running about a 325 horse Poly head, and he said, "Oh, well you'll have a little fun then." LOL
Keep in mind, this is the cam still in the box... when they sent me a set of 1.5 rollers for the magnum head I realize that was going to throw things way off because the Edelbrock head utilizes 1.6 SBC rockers. That would mean something was going to break... so we had to get a different cam grind to maintain these figures.
lookin nice
i’m not sure about the cam n lift stuff
can i just drop off my 440cu with y’all to work your magic on it then i just pick it up a few weeks later?
watermelon
i’m not sure about the cam n lift stuff
can i just drop off my 440cu with y’all to work your magic on it then i just pick it up a few weeks later?
watermelon
65RoadRacer
Well-Known Member
LOL... I'm a driver, not a builder, so I gave all the details to the gurus and told them what I'm hoping to achieve and they did the numbers.
65RoadRacer
Well-Known Member
65RoadRacer
Well-Known Member
A couple more pics of the engine.. .just about ready to get fired up...
wyrmrider
Well-Known Member
do you have a dykem stripe on a valve tip? how wide a pattern?
very nice
watermelon
watermelon
Similar threads
