• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

smoked a belt

eldubb440

more miracles than Jesus
FBBO Gold Member
Local time
4:45 PM
Joined
Jul 17, 2008
Messages
27,387
Reaction score
86,186
Location
South Jersey USA
tensioner pulley bearing is tight :mad:


IMG_20260216_150610477.jpg
IMG_20260216_150642188_HDR.jpg
IMG_20260216_151714949.jpg
 
My dryer doesn't use a pulley but has the 'slider' for a lack of knowledge of what to call it. Thought about replacing it while I was in it a lot of years ago but thought I'd give it a shot. So far so good after about 7 years or so AND I got it used for free from the side of the road. It did need a door switch and is most likely why it was on the side of the road. The thing looked fairly new too. Thinking that someone was using their foot to close the door and is what most likely broke the plastic switch.
 
Back
Top