Loulang
Well-Known Member
My sniper handheld says my voltage goes down into the low 9’s and has a red box but my other voltage guage stays around 12. She runs great and starts right back up. Any suggestions? Thanks for any suggestions in advance.
Use a trusted voltmeter to measure your voltages - don't rely on an Autometer or similar gauge.I have a separate guage on battery that will read like 12 but my sniper handheld goes up and down from almost 12 to high 9’s. I’m thinking my sniper is reading my voltage limiter now that I’ve been pondering on the subject
YesIs your sniper systems power and ground wires connected directly to the battery like the instructions tell you to do?
Holley recommends direct battery connection.
I used a dual post battery & dedicated the side post specifically to my sniper to minimize any electrical issues.
Do you know which battery you got?
View attachment 1458173
I love the red cap look where did you get those?Search: DieHard 34 78-4
I purchased from AutoZone
Here it is installed - I removed the DieHard labels, added Mopar & red caps
View attachment 1458280
I'm missing something.I believe I just fixed it. I moved the ground closer to my alternator and now reading 12-11.9 thanks everyone for helping me out MUCH APPRECIATED as always.
Found on Ebay. Here's a similar listing. Mopar battery red capsI love the red cap look where did you get those?