• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Source for front disk brake positioners

Coelacanth

Well-Known Member
Local time
1:23 PM
Joined
May 10, 2024
Messages
1,779
Reaction score
2,933
Location
Edmonton, Alberta, Canada
I let my original disk brake positioners soak in Evaporust then wire-brushed them mostly clean. I see the FSM recommends replacing these with a brake job, but they're not included in the hardware kit and I could not find them anywhere on RockAuto. Who has a source for these, and might my cleaned-up originals still do the job? Also, looking closely at these, the top two have a divot and not just flat. The FSM doesn't indicate which positioner goes towards the front and which towards the rear of the caliper. Any ideas?

Positioners.jpg
 
#332-48846 in the Layson's catalog. You're welcome. Their $20 catalog has helped me sell so many parts for them. I should be on commission or at least get my $20 back. :rofl: :poke: :rofl:

@Rick@Laysons
 
Auto Transport Service
Back
Top