• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

switching from fuel cell back to tank and hard lines -What do i need ?

73dart360

Well-Known Member
Local time
2:22 AM
Joined
May 3, 2011
Messages
193
Reaction score
28
Location
Fort lauderdale, floida
my 67 coronet came with a fuel cell with braided lines , The car has a new 440 .030 10.5-1 compression, Stealth heads stock -do I need 5/16 or 3/8 lines also If I do need the 3/8 line do the reproduction Tanks accommodate this and is there one place that can sell me all I need ,I know I will also need a sending unit,straps,Tank pad,all of the small accessories ,I appreciate any help
 
I'd use 3/8", and everything should be available online. I'd get stainless lines from inline tube in Shelby Twp. Mi.
 
3/8 lines and sending unit...ground strap..good to go...and find the sending unit wire
 
I removed a fuel cell & electric pump from the back of my car.I looked on ebay and found a place in Canada with a factory correct replacement tank, strap & 3/8 sending unit for my charger about 5 years ago. I used my existing 1/2" fuel line and a holly high volume mechanical pump and have had no problems.
 
Auto Transport Service
Back
Top