• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Tire and wheel fitment

mopar951

Well-Known Member
Local time
1:20 AM
Joined
Sep 28, 2024
Messages
86
Reaction score
15
Location
California
Hi everyone I have a question I’m looking at these wheel and tires the rear ones are a 15”x10” inch wheels the tire size is 285/70/r15 and the rear wheels have a 4”backspace my car is a 1969 dodge coronet will these rear wheels and tires fit?

IMG_6621.png


IMG_6620.png
 
They'll likely stick out the fenders, and the *** end of the car will have to be jacked up. I would look for a 5-5.5 backspace on a ten inch rim.
 
They'll likely stick out the fenders, and the *** end of the car will have to be jacked up. I would look for a 5-5.5 backspace on a ten inch rim.
OK, thanks for the advice man. I appreciate that.
 
I think they're about 31" Dia. Which is huge. I think you'd have to get pretty creative..
 
Yep wrong offset and very tall.

Hijackers for the win!
 
Using air shocks like when we were kids is your only hope of running that setup on your car.
 
Auto Transport Service
Back
Top