Tire size for 15x10 wheels

[Tyron68]

Was curious what tire size people are running in 15x10 wheels. Pics would help if you have them. Im running 295/50/15’s. Thanks

 

[toolmanmike]

N50-15's L60's were too big of a stretch.

 

[gkent]

I ran L60 15's on 8" wheels. I have 10" now with 28 x 12.5 x 15 Mickey Thompsons. What car are you putting them on? Nitto 325 50 15's are a nice fit for a radial. 28" tall.

 

[Black_Sheep]

295/65R-15 on a 15x10 wheel

 

[33 IMP]

325-50x15s would be a bit taller, and a little over an inch wider than your 295s. Either is a good fit for a ten inch rim.
I have a pair of 15x10.5s and a pair of 15x10. Neither has tires on em.
The 10.5s have too much bs except for a very specific chassis setup, and the tens have too little bs for a street car, and too much bs for a big tire car.
Oh well.......

 

[33 IMP]

295/65R-15 on a 15x10 wheel

View attachment 1714669

That's a TALL mutha of a tire for a stock wheelwell opening! Bada$$.

 

[gkent]

i’m surprised it doesn’t rub!

 

[sc440]

Running 275/60/15 on 10”

 

[hunt2elk]

I have 2 cars with 15x10 rims. 295/50 on one and 275/60 on the other.

 

[gkent]

Go big or go home.

 

[Cheapsunglasses]

15x10 4.5” back space, 275/6015, and had to roll the fender a little

 

[stage3]

15x10 ET classic with pro trac s375's...

 

[RemCharger]

That's a TALL mutha of a tire for a stock wheelwell opening! Bada$$.

i’m surprised it doesn’t rub!

The rub is,,, is it a stock opening

 

[gkent]

This is a 15 x 10 wheel, 5-1/2" bs. The tire is a M/T 28 x 12.5 x 15. The diff has been narrowed 1/2" per side and I have about 3/4" gap to the wheel lip. This is obviously not "ride height" as there is no weight on the read suspension. But one thing worth noting is that I have 10" drums and with the suspension hanging as it is I can JUST get those tires in the opening to to mount. Any bigger and they wouldn't go. With a stock width rear end they likely wouldn't fit.

 

[Black_Sheep]

The rub is,,, is it a stock opening

They are stock wheel wells, no tubs and no narrowed axle. Without 3800 lb. SS springs I don’t think it would work.