Undercoating

[T5 copper]

Is por 15 any good for undercoating

 

[Timmayy]

I am going to use POR 15 and then one of those truck bedliner type sprays over it. That should seal it pretty good.

 

[493 Mike]

This is the tintable Raptor bedliner I used. Very easy to use and vary the texture if wanted. I detailed a few areas with gloss black and masked them prior to bedliner. I sprayed it over black epoxy. The hard part was scuffing all the epoxy before shooting the Raptor. If top coating the epoxy ASAP no scuffing was required. It is applied with a "shutz" gun and must be proprietary to fit Raptor's bottle. Now I own 3 different shutz guns!
Mike

 

[Biopack]

For undercoating, a friend used HUD12 and now I'm using it on my restoration also.

 

[snakeoil24]

Avoid pot 15 at all cost it peals off go epoxy then gator