Update? on 2932230 window division channel

[dadsbee]

Window slot looks deeper than OE, let us know if the slider cover "wings" sit in the correct place.

 

[6pktgo]

I have a set of nos & can take a measurement of that depth for the glass ??? Or a pic even ???

 

[theman440]

GO ahead and measure, I'll measure my re-pops.

 

[6pktgo]

Here you go ,the first pics are of a new one that has never been out of package, until now & the second set of pics is an excellent original. 9/16th + a blonde hair deep ?? & 1/4 inch + a red hair across.

 

[1 Wild R/T]

Could I get a calibration check on that red hair? LOL

 

[theman440]

I just got done installing the "new" reproduction window division channel on my passenger door. Couldn't be happier, nice fit, glass is slides up and down real nice.

 

[Kimodc]

I can second what theman440 says….installed a set last week myself and the work great!

 

[threewood]

I can second what theman440 says….installed a set last week myself and the work great!

Anyone have a link to the sets being offered? I looked on mrmoparts website but couldn't find them.

 

[theman440]

Mr MoParts - p/n 150130

 

[threewood]

I installed one of these on my passenger side window and it isn't perfect. I cleaned the hell out of the metal channel too. It was tight as hell with the new plastic guides. Tried the original plastic guides and still tight. Ended up sanding the guides way down in height and width to get it where I wasn't busting blood vessels trying to slide it by hand. Added lube to the metal track and it seems to be ok for now. I'm not impressed.

Profile looked pretty close to the old repop except the center ridge was flatter.