Want to convert my 67 Charger's hood release from Exterior to Interior! What do I need to convert mine?

[2fast4u8]

From what I see I have to have the cable set and a different hood latch set?!

I defer to you all.

 

[Dave6T4]

Get all the stuff you need from a '66 Charger. They had inside hood release.

 

[gkent]

Yeah, just trot on down to your local pik-a-part and pull that stuff off a '66 Charger !!!! LOL!

 

[RemCharger]

Which pik a part is that again???

The cable you can get new. Then you need the latch mechanism, the handle and bezel, and the clamps / return spring

 

[gkent]

All the one's around Dave's place !!

 

[440 4 speed]

Then the bezel won’t fit correctly in the dash.
Possibly you could go to a farm supply business or speed shop. Get a long choke cable and bracket. Create your own.

 

[Dave6T4]

Run a WTB ad on here. There must be guys on here with parts cars.

 

[gkent]

Run a WTB ad on here. There must be guys on here with parts cars.

Yup. And they all either just joined the forum OR they have a buddy you should contact !!!

 

[440 4 speed]

The 66 dash bezel hardware will not fit correctly. You need a 66 dash to do it correctly, then more hassel’s.
I suggest mounting the release handle on the bottom left side of the steering column.

 

[RedBeard]

I am replacing the dash cigarette lighter with a hood release pull in my 67 but keeping the original exterior lever. Kits are out there for the cable and find a way to attach. Get original hood release handle and bezel for the inside from a parts car or someone on here. If you really want, also get the upper cross support with the correct hardware.

 

[440 4 speed]

I am replacing the dash cigarette lighter with a hood release pull in my 67 but keeping the original exterior lever. Kits are out there for the cable and find a way to attach. Get original hood release handle and bezel for the inside from a parts car or someone on here. If you really want, also get the upper cross support with the correct hardware.

View attachment 1855974

Now you are unoriginal heh heh. Very good idea! I will still use our lighter socket to plug chargers phones in. But could plug into the rear one.
Offside, one of our 66’s has a metal block off plate so it cannot be opened from the grille side.

 

[RedBeard]

Now you are unoriginal heh heh. Very good idea! I will still use our lighter socket to plug chargers phones in. But could plug into the rear one.
Offside, one of our 66’s has a metal block off plate so it cannot be opened from the grille side.

Yeah, also unoriginal in that I added a C body rear bezel to my console that has the light and cigarette lighter for charging.

 

[YY1]

I've owned a lot of 66 and 67 B bodies.

Inside hood release is extremely uncommon.

I imagine someone, somewhere has saved one, though.

 

[Don Frelier]

I've owned a lot of 66 and 67 B bodies.

Inside hood release is extremely uncommon.

I imagine someone, somewhere has saved one, though.

66 Chargers all had them.

 

[Davefinan]

I have a 66 charger and I’m not sure what it would take to transplant it to a 67. I’ll say this though, there is really no security aspect to them You can reach under the hood and still unlatch with your fingers In fact I end up doing that most of the time because I forget about the remote release.
So for me , no real advantage to it……but no , you can’t have mine.