What are these solid rocker arms off of?

[1 Wild R/T]

Those are Crane style rockers NOT Chrysler style. I dont see the word crane so they could be Sig Erson copies

I tend to agree, better pictures would help...

 

[Charger Dana]

Hopefully this link will work from For A bodies. They look like my 63 max wedge head stands/“pedestals” but I have after market rockers. I found this pic and link:
Max Wedge Complete Rocker Assy with Push Rods

 

[1 Wild R/T]

View attachment 932759 Hopefully this link will work from For A bodies. They look like my 63 max wedge head stands/“pedestals” but I have after market rockers. I found this pic and link:
Max Wedge Complete Rocker Assy with Push Rods

The Max Wedge & Long Ram/Short Ram stuff looks allot like the Isky rockers except Mopar used friction type adjusters which pretty much suck & Isky used adjusters with lock nuts...

The rockers the O/P posted look more like Crane/Erson/late Isky which are actually relabelled Crane... Pictured below..

 

[minnesota guy]

View attachment 932513

THANKS AGAIN!!

 

[chooch]

the stands are also not max wedge

 

[33 IMP]

The problem as I see it, is the op posted pictures of the bottom of the rockers. All the distinguishing features are on the top of the rocker.
And those stands can absolutely be max wedge, the early four bolt valve cover versions.

 

[1968rt]

the stands are also not max wedge

Those stands are Max wedge Stage I for sure. Not sure when they changed over to cast in stands...maybe Stage III

 

[chooch]

Those stands are Max wedge Stage I for sure. Not sure when they changed over to cast in stands...maybe Stage III

in the op photos not in this life time & the photos in the a body only ad yes

 

[33 IMP]

in the op photos not in this life time & the photos in the a body only ad yes

What makes you think so? The fabo stands and the op stands are the same.

 

[1968rt]

We are talking about the aluminum stands correct? They were common on all big blocks up until 1964. Early Max Wedge used these with mechanical rockers and standard engines used stamped steel. Did I miss something here?

 

[chooch]

these are correct factory 62-63 max wedge rocker arm stands.

 

[chooch]

these are not..

 

[1968rt]

So your saying they are different because of the little tab on either side? We used to mill those off and custom shim each rocker. I have set of stands in the garage from a 413 Stage One . I have to take a look now.

 

[chooch]

So your saying they are different because of the little tab on either side? We used to mill those off and custom shim each rocker. I have set of stands in the garage from a 413 Stage One . I have to take a look now.

you would be correct

 

[1968rt]

Well I found the box of rockers and stands and you were right. I guess I remember milling the stands as replacements

 

[chooch]

I'm sure it was a pretty common thing to do & I wouldn't blame anybody for doing it.