ksurfer2
Well-Known Member
Wilwood discs on all 4 corners of my 64 dodge. Manual master cylinder. Front brakes bleed fine. Out of the rear, I get nothing but air bubbles. I have tried bleeding with the brake pedal and with a vacuum pump with the same result. I have bench bled the master. I have removed the bleeder valves on each rear and they are clean and clear. I tried wrapping the treads with teflon tape in case the air was getting in though the threads. Were is all the air coming from? Level in the master is not going down (to replace the displaced air in the lines). There are no leaks in the brake lines (that would let air in). I am stumped.