Led

[terzmo]

Installed new LED's in 67 R/T and they are bright but will not flash with turn signals...stock bulbs work fine. Different flaher ? anyone use them ? Thanks in advance

 

[snakeoil24]

You need a flasher designed for LED lights! They require a far lower amp draw to work.

 

[HYRDGOON]

Search "No Load" flasher

Here's the one I bought http://www.summitracing.com/int/parts/hfm-ff552nlf/overview/

 

[GTX440]

You're going to need a load equalizer; as snakeoil mentioned above, the amp draw is far less for LED lights than the bulbs. Post pictures so I can see what that '67 R/T looks like with those LEDs!

 

[terzmo]

Search "No Load" flasher

Here's the one I bought http://www.summitracing.com/int/parts/hfm-ff552nlf/overview/

so with this...I also need to convert the front bulbs also....and are my fronts the same as rear....have to check.....Thanks for the info

 

[HYRDGOON]

Fronts are also 1157's but you will want an Amber set for the fronts. Did you get red LED's for the taillights

This one flasher is all you'll need to make the signals work

 

[usaroadrunner]

just like hyrdgoon said this is what i used with my digi-tails and work perfect.........